GENSERV INTERNATIONAL INC.
 
 
 
 
 
WATER TIGHT GATE/FLOOD GATE
YOU ARE HERE: PRODUCTS > WATER TIGHT GATE >


 
WATER TIGHT GATE
 


PARTNERS

 
Watertight/ Flood Gate
WATER TIGHT GATE

Flood Gate System (Watertight Gate). After years of research and development, Dai Chen has designed the most trusted and top quality flood gate product in Taiwan. The company obtained patents in Taiwan, Japan, and Thailand and now in the Philippines. And by then, we became an exclusive distributor of Dai Chen products from Taiwan.

 
PACKAGE INFORMATION
Product Variants:

Flood Gate

PRODUCT INFORMATION
Flood water damage is devastating. Whether it's flash flooding from heavy rain, sewer overflow or storm surge, the effect on buildings and business can be catastrophic. Properties are ruined, businesses and municipal organizations cannot function, lose money and fold. Did you know that nearly 40% of small businesses never restart following a disaster because just a few inches of water can cause tens of thousands of damage?

PRODUCT SPECIFICATIONS

WATERTIGHT GATE MATERIALS

1.BASE PLATE :Base Plat / Rel.Material: 2 mm SUS 304 stainless steel. Capable of holding pressure load up to 80 tons. .Through the test results from MIRDC (Metal Industries Research & Development Center) .The surface is flat or level with the floor after plate installation is finished so avoid the danger of tripping.





2.MAIN PILL :
Material: Aluminum Stainless Steel Alloy (With some molded parts) and EPDM Rubber Seal coated . Can be applied with a variety of different situations and mounting ways. .With stainless steel fasteners to press or adhere the plank. . EPDM Rubber (Ethylene Propylene Diene Monomer):
1. widely used in car windshield.
2. Ability to withstand temperatures up to 160 * and anti chemicals.
3. Stable in all weather and can be used for more than 10 years.



3.WATERTIGHT PLANK
Material: Aluminum Alloy EPDM Seal. The surface of each plank is coated anodized.
. Each plank has a height of 16cm and 3.5cm thick.
. Weight 2.785 per meter.
.With 6 bones to help withstand water pressure.
.With EPDM rubber strips at the bottom of each plank.
.With plastic cover on both sides.
. Have passed the tests from MIRDC (Metal Industries Research & Development Center):
Each 1600cm2 can withstand loads up to 1300kg.





4. LOCKABLE TIGHTENING SCREW
Material: Stainless Steel Description.
To assemble on the top of the main mullion or the bilateral mullion, rotate to tighten the planks and compact to the C type ground level.



5.BACK SUPPORT:
Material: Aluminum Stainless Steel Alloy. Required to withstand water pressure load: Water pressure count based on the width and height of the flood retaining door.
. Have passed the load test from MIRDC (Metal Industries Research & Development Center): The width of
1 meter can withstand load 3700Kgf.
.There is a base holder behind the rear: 1. With a base depth of the holder up to 5 cm.
2. Parallel to the floor after the work is done.





6.BRACKET STORAGE:
Material: Stainless Steel Type: Horizontal or Vertical
The products have passed international test standards and are certified by FM Approvals.test water pressure: With a water level of 70cm and average speed of more than 1 m / s.
. Wave test:
With wave height should be 10 cm. There is no leak in 30 minutes and is certified by FM Approved. Obtain patents from America, China, Japan, Malaysia and Taiwan. The flood retaining door can be operated easily and installed in 10 minutes with only 1 person. 100% watertight and has been sold to Australia, China, Japan, Indonesia, Philippine and Thailand.




The product has passed international testing standards and certificated by FM Approvals.
-Wave test for the flood gate:
-The height of wave shall be 10 cm.
-No leakage in 30 minutes and certificated by public authority unit.
Obtained patents from America, China, Japan, Malaysia and Taiwan. The flood gate is easy to operate and can be deployed in 10 minutes by a single individual. The performance to stop flood is at 100% efficiency, and this product has already sold to Australia, China, Japan, Indonesia, Philippine and Thailand



Deploy Procedure WITHOUT Bilateral Stanchion and Back Support
 
 
 
ABOUT US

Our Company
Legal Information
Business Partners
Jobs @ Genserv
News
COME, LET'S TALK

Email: info@genserv-ph.com
Tel No.: (632) 887 8137
(632) 845 2818
CP No.: (+63) 917 530 7788
Fax No.: (632) 889 0770
OUR ADDRESS

U-302 Global Tower (Cianno Building)
Gen. Mascardo cor. M. Reyes Sts.,
Brgy. Bangkal, Makati City 1233

See Map
F. A. Q.

Online Inquiry
Directions to Office

STAY IN TOUCH

          

ENGR. WESLEY E. TATTAO
Senior IT Consultant
saiberkhai@yahoo.com
GENSERV INTERNATIONAL, INC.
wesley tattao
all rights reserved ©